What you'd want is the ShockStrap Soft Ties for Motorcycles and Dirt Bikes # 297-2STB-2 as this will allow you to loop around the handlebars and the clip will be able to close. Typically if the bike is secured proplerly the spring clips really aren't needed. Most tie-downs for motorcycles/bikes don't have them and they simply get depressed when using on a wider bar without issue. view full answer...
For an under cabinet light we have the Bargman Double Interior Light with Dual Switches # 30-76-243 that works well in the application you mentioned. It's only 11 inches long though. view full answer...
Yes, the LED Light Kit for Draw-Tite, Tow Ready, Pro Series, and Rola Railed Cargo Carriers Item # 98174LED is perfectly compatible with the 24x60 Reese Cargo Carrier for 2 Hitches - Steel - 500 lbs Item # 63153 that you are planning on getting so this will work well for an LED light kit that will also be very easy to install and use. view full answer...
I found the correct motor for you but we carry it as a different part number. You'd need the Lippert Components Kwikee Step Motor Replacement Kit For Pre-IMGL # LC379608 and you'd be set. view full answer...
Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer.
The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent.
If there is a rolled metal hinge attached... view full answer...
I spoke with my contact at Atwood about your question on the Atwood Ducted AC Unit part # AT15028-22. She informed me that the # AT15028-22 can operate the furnace, but not with a remote control. A thermostat will have to be wired in for the A/C, and it will also control the furnace.
Since you already have a thermostat you'd be set. view full answer...